PreSonus® Temblor® T10 Studio Subwoofer (Single)

Intended for serious personal studios and professional music-production environments, the Temblor® T10 lets you take charge of the low-frequency foundation of your mix. An ideal companion to Eris®, Eris MTM, R, and Sceptre® series active reference monitors, the Temblor T10 compliments full-range monitors without overshadowing them and extends the reach of your full-range system's low end with a more musical and natural approach.

Available here:

Extensive user controls include input gain, continuously variable lowpass filter for creating a seamless crossover transition, and a switchable highpass filter that removes content below 80 Hz from the full-range signal sent to the monitors.

Features

  • 10-inch glass-composite low-frequency transducer

  • 250 watt, Class AB biamplification

  • Input gain control (-30 dB to +6 dB, continuously variable) and continuously variable lowpass filter (50 Hz to 130 Hz)

  • Switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent to the main monitors

  • Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out

  • Left and right, balanced XLR and ¼" TRS and unbalanced RCA main inputs

  • Includes Studio Magic, a suite of over $1000 USD worth of music production software

Highlights & Specifications

Versatile Connectivity.

The Temblor® T10 offers versatile connectivity, including left and right balanced XLR and ¼” TRS and unbalanced RCA main inputs. Connect your full-range monitors with left and right balanced XLR or ¼” TRS outputs; a switchable highpass filter removes frequencies below 80 Hz. An XLR subwoofer output enables connecting a second Temblor® T10.

World-Class Recording Software Included.

Temblor®-series studio subwoofers come with a special edition of PreSonus® Studio One® Prime recording and production software, with the entire Studio Magic software suite enabled. Studio Magic includes over $1,000 USD worth of music software including plug-ins, loops, virtual instruments, effects and tutorials.

Seamless System Integration.

The Temblor® T10 integrates seamlessly with your full-range monitors. A variable lowpass filter sets the upper (crossover) frequency reproduced by the subwoofer. You also get an input gain control (-30 dB to +6 dB), polarity invert switch and ground-lift switch. An included momentary footswitch lets you check your mix with and without the subwoofer.

Specifications:

Electronics

Voltage - 100-120V

Wattage - 250W Peak, 170W RMS

Hardware

Cabinet Material - Vinyl Laminated, Medium Density Fiberboard

Miscellaneous

Connection Type - IEC

Monitors

Protections - RF interference, Output-current limiting, Over-temperature, Turn-on/off transient, Subsonic filter, External Mains Fuse

Audio Controls - Input Gain Range: -30 to +6 dBPolarity Switch: 0 degrees or 180 degreesLow Pass Filter Control: 50 Hz to 130 HzGround Lift Switch: On/OffHigh Pass Filter Switch: On/OffBypass Footswitch: On/Off

Peak SPL - 113 dB (at 1 Meter)

Monitor Inputs - 2 x Balanced XLR, 2 x Balanced 1/4" TRS, 2 x Unbalanced RCA

LF Transducers - 10" Glass-Composite, Front-Firing

Frequency Response - 20 Hz to 200 Hz

Monitor Amplifier Power - 250W Peak, 170W RMS